Phoenix
Solution Performance Amplifier
A New Era in LGR Technology
The new Phoenix
Solution LGR performance amplifier widens the effective
operating range of LGR dehumidifiers, increases grain depression,
and improves water removal rates up to 100 percent.
The Solution
is a specially designed intercooler that pre-cools the incoming
air stream to the LGR dehumidifier. This pre-cooling is
the same process that provides LGR dehumidifiers with their
leap in performance over conventional dehumidifiers. The
Solution is designed to take advantage of outside, unaffected
or air conditioned air to provide significant water removal
in drying conditions up to 140°F. Therma-Stor testing
has revealed an increase in water removal rates and faster
drying times using the Solution by utilizing cold outside
air.
The Phoenix Solution
marks a new era in LGR dehumidifier performance. Since the
pre-cooling function of the Solution actually removes BTUs
from the drying area, it reduces the dependence on air conditioning
and the need to sacrifice drying equipment to maintain your
optimal drying conditions. The Solution enables significant
dehumidification while taking advantage of ultra fast, high
temperature drying rates. This high temperature dehumidification
performance is an upgrade to heat-only drying equipment
which is otherwise limited by high dewpoint conditions.
When outside grain levels are high, the Solution allows
dehumidification to enhance the drying process.
The Solution
improves the grain depression of the dehumidified air. This
increases the vapor pressure differential (the key to evaporation)
up to 33% and accelerates the drying process. This improves
drying times in all classes of water damage but is particularly
beneficial in specialty drying applications, such as hardwood
floors.
The
Solution is designed to nest into the top of the Phoenix
HT and 200 Max and is constructed of the same quality materials.
The increased operating efficiency of the dehumidifier provided
by the Solution is often equal to the 1.6 amp power requirement
of the unit. The Solution is easy to carry and stacks for
transportation and storage.
The Phoenix Solution
is easy to set-up. Simply remove the top and filter from
the Phoenix 200 Max or HT, install the dehumidifier bracket,
set the Solution into the top opening of the dehumidifier
and slide forward into the capture guides on the dehumidifier
bracket. Then, duct the inlet air of the Solution to either
an outside, unaffected or air conditioned source, and duct
the outlet of the Solution back to the same source.
Phoenix
Solution Specifications
| Part No.:
|
4026600
|
| Power: |
1.6 amps,
110-120 VAC, Grounded |
| Blower:
|
230 CFM
(Secondary Air Stream) |
| Ducting:
|
Primary
Air Stream Inlet: 12" Flex-Duct; Outlet: NA
Secondary Air Stream
Inlet: 8" Flex-Duct; Outlet: 10" Lay-Flat
|
Problems
Solved by the Phoenix Solution:
