Phoenix
Guardian HEPA System
True 1400 CFM
Air Scrubber
The Phoenix Guardian
HEPA System was the first portable air scrubbing device
designed exclusively for the restoration industry. The Guardian
can perform several critical air quality remediation functions
simultaneously.
The Guardian
HEPA System captures virtually all removable airborne particles.
The optional 4-stage absorption filter contains a blend
of activated carbon and potassium permanganate to remove
airborne odors and chemicals.
The true 1400
cfm capacity of the Phoenix Guardian HEPA System will clean
one air change of a 12 x 14 foot room in less than a minute.
In order to be effective, an air scrubber should be able
to perform a minimum of four air changes per hour. Therefore,
a single Guardian can be expected to control up to 21,000
cubic feet.
The Guardian's
high airflow and multiple ducting options allow for the
combination of negative or positive air flow control of
an area and containment air scrubbing at the same time.
This provides the unique ability to continually filter the
indoor air and depressurize the damaged site to prevent
the spread of contamination simultaneously.
The Guardian's
intake will accept either 18" flexduct or 12"
flex-duct with the included adapter, to pressurize areas
for protection from contamination or to draw contaminated
air from areas that are difficult to access or too small
to accommodate an air scrubbing device.
Every Guardian
HEPA System comes with one 14" lay-flat duct ring,
for 100% negative air operation, and two 10" lay-flat
duct rings for a combination of negative air, air scrubbing
or positive airflow.
Optional Activated
Carbon & Potassium Permanganate Filtration
The Guardian
Carbon Filter Frames are an improved way to provide gas
and odor filtration. The 20-gauge galvanized metal frames
are available in 24" x 24" x 2" (Part No.
4024764) for the Guardian HEPA System. The Carbon and Potassium
Permanganate media to fill the frames is available in 30
pound buckets (Part No. 4024528).
There are several
advantages to using the Carbon Filter Frames instead of
manufactured carbon filters:
The media will stay "fresher" stored in the 5
gallon bucket.
Loading the filter by the job provides the opportunity to
adjust the amount of media for the specific job.
Substantial savings are realized by using the filter frame
over manufactured carbon filters.
Replacement foam liners and honeycomb inserts are also available.
Features
