Phoenix
Centrifugal Air Movers
The most airflow for the fewest amps of any centrifugal
Low amp draw
(UNDER 3 AMPS!), balanced airflow characteristics and maximum
velocities of 2700 FPM are the foundation on which the Phoenix
Centrifugal Air Mover is built. We made sure the body was
the most rugged and durable it could be, to stand up to
the rigors of the restoration industry.
Getting more
equipment into the drying chamber is always a challenge.
The typical household electrical system cannot support the
amount of equipment needed to dry the structure quickly
and efficiently ensuring a nonstop search for equipment
that provides both performance and low amp draw.
The unique 1/3
horsepower design of the Phoenix Centrifugal Air Mover coupled
with a two-speed switch allows the restoration technician
to deliver the most airflow using the fewest amps. Maximum
amp draw on high speed is 2.8 amps. Minimum amp draw on
low speed is a mere 2.4 amps. This means that it is now
possible to fit as many as four centrifugal air movers onto
a typical 15 amp household circuit. If you attempt four
centrifugals from our competition, we recommend you locate
the breaker box first.
The CAM housing
is stackable, washable, durable, and chemical resistant
and multi-positionable. In addition, molded-in runners allow
for the air mover to be positioned horizontally, 45°
and 90° angles.
Features
-
2-Speed,
1/3 Horsepower Motor with automatic-reset thermal protection.
2.8 Amps on High Speed 2.4 Amps on Low Speed
-
Maximum Velocity – 2700 FPM
-
Balanced
Exhaust Airflow
-
Directional Airflow Horizontal, 45° Angle, 90°
Angle
-
Durable, rugged, chemical resistant housing, fan wheel,
and control design.
-
Operator interface conveniently located for easy access,
featuring: power indicator lamp and large three-position
switch.
-
Phoenix exclusive Pilot Light and Sealed Switch are recessed
to prevent damage.
-
Ergonomic carry handle and power cord storage.
-
Non-marking, anti-skid, rubber feet.
-
On-board duplex GFCI outlet and circuit breaker (Phoenix
CAM Pro only)
