The Phoenix Axial Air Mover is the industry’s only air mover specifically engineered with patent pending FOCUS™ Technology. FOCUS Technology revolutionizes evaporative drying by producing air velocities greater than competitive products and focusing those velocities on hard-to-dry areas such as carpet and pad, sub-floor and walls.
The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, FCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box.
Performance
-
Greater air velocities than competitive products
-
Focused velocities 0 to over 23.5 feet
-
Directs air flow towards problematic corners, where the wall meets the floor -
Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage
-
3000 cfm
-
Long-life 2-speed motor
-
Low noise, quiet operation
Packaging
-
Lightweight and compact linear low density polyethylene (LLDP) housing is washable, chemical resistant and stacks for storage
-
Colored Restoration Red for high visibility
-
Ergonomic handle
Features
-
Power-on indicator light
-
Automatic hour meter displays site run time
-
On-board power management:
-
Circuit breaker protects air mover and attached devices and prevents nuisance visits to the junction box
-
GFCI protection promotes operator safety in wet applications
-
Duplex AC outlet allows daisy chaining of up to four axial air movers
-
20 ft AC cord with cord management
-
Units interlock for ease of stacking during storage and handling
-
Weighs 2.5 lbs less than competitive units
Phoenix Axial Air Mover Specifications
| Part No.: | 4025200 |
| Drive Motor: | 1/4 hp 1-phase 110/120 VAC 2-speed 4-pole, PSC Electric Motor CFM: Approximately 3000 |
| Cord: | 20 ft Power Cord |
| Outlet: | 15A UL Rated GFCI Duplex Receptacle |
| Current Draw: | 2.5 Amps |
| Voltage: | 115 VAC |
| Warranty: | Year One – 100% parts and labor (all components); Year Two – 100% parts only (all components); Year(s) Three through Seven – Only materials and workmanship of the housing are covered |
Dimensions
| Machine | Shipping | |
| Width: | 19.9″ | 19.25″ |
| Height: | 19.5″ | 20″ |
| Depth: | 15.2″ | (intake to exhaust) 15.5″ |
| Weight: | 29.5 lbs | 32.7 lbs |
Literature (PDF)
