Indirect-Fired Heaters

Our Drying Systems create the Fastest Drying possible. Unlike our competitors, our systems control the temperature at the materials. We use a thermostat control that you place in the drying area to regulate the temperature at the materials. This is unique because most units cannot control the temperature at the materials. They control the exhaust temperature only.

The ITA 75 is a true Heat Exchange Heater. Only fresh air is blown into the building or crawl space. The Biggest Difference Between Our Drying Systems and the Competition Is the Price. The competition will tell you they are different. However, they blow hot air across a wet material. Just like we do. No Drying System Out There Can Even Come Close to the Price vs. Performance of Our Drying Systems.

Powerful fans ensure high static pressure allowing heater placement outdoors with clean dry heated air directed indoors to drying area.

High temperature control safety thermostat comes standard.

Efficient burning as a high pressure pump guarantees full combustion.

High efficiency with low fuel consumption.

Easy access filter makes maintenance easier.

Large capacity fuel tank provides a minimum of 17 hours of continuous operation.

• Built-in reliability and portability.
• Photoelectric flame safety sensor.
• High temperature control thermostat.
• Thermostatically controlled cooling process after shut down.
• Standard (restoration packages only) thermostat for constant temperature control.
• Durable powder coated finish.
• Heavy duty wheels and handle provide mobility.
• Grips and protection bar on front side.

IMA 61 is a great system. It has a recirculation system that will give you about 17 degrees additional increase in temperature rise compared to non recirculation systems. Also the power needed is 110vac, the IMA 111 & 185 require 220vac. The ductability is 75’ which makes it great for those jobs that require more hose. It has a external fuel tank (Approximately 50 Gallons) that will give you a much longer run time without the need to refuel. This is a great system.

• Durable phosphated body panels with powder coating.
• With overheating protection and temperature limitation of warm air.
• Preheating of chamber, so that no cold air is blown during start up.
• Fully automatic, controllable with thermostat connection.
• Tigerloop standard.
• Fuel filter with condensate separator.
• Burner with rain cover and lower tray for oil containment during servicing.
• Room ventilation is required, fresh air connection available.
• Radial HP
• High Pressure’ for extra high pressure (2,0″ WG) and air flow.
• Radial fans are essential for heat distribution with hoses.
  

• Stackable construction with crane hooks.
• IMAC 2000 S are optionally available with a 2 step burner and fan. Ask your dealer.
• Body work in stainless steel.
• Standard with stainless steel frame on box girders with fork truck slots and lifting hooks.
• Lockable door panels for control box and burner area with feed through glands for cable and fuel hoses.
• Intercal industrial burner with flow control.
• Completely automatic burner control with thermostat connection.
• With overheat protection and temperature limitation of warm air.
• Fan and thermal security resettable from control box.
• Control box standard with soft-starter, automatic phase reverser, hour counter and 5 resettable fuses.
• Earth leakage switch and transformer for 0 are available.
• Removable outlet flanges Ø 500 or 600 mm (recirculation hose flange available as accessory).
• Multi-functional warm air distribution head for 3 to 6 hoses available.

The IDF-2000 indirect-fired heater provides efficient, clean burning heat up to 2,000,000 BTU/hr using a variety of fuels and is available in skid-mounted or trailer-mounted options. With easy connecting ducts for even dispersion of heated air over large areas, the IDF Series is designed for immediate set-up in a minimum amount of time, and units can be supplied with the necessary accessories to ensure proper installation and maintenance. A remote thermostat allows you to maintain your desired temperature levels at all times. Meets CSA and ETL approvals for safety and environmental standards with both clean and vented air for safe use in confined spaces.