700 CFM @ 2.5 ESP / 16.6 lbs of H 0/hr @ 75°F / 50% RH
The DESICAiR DRY-700-35-E desiccant dehumidifier is designed for water damage remediation service. The DRY-700 is portable, self contained, and is designed for maneuverability in small spaces like building elevators and tight corridors. Engineered to operate under severe operating conditions, the DESICAiR DRY-700 uses desiccant technology to remove water vapor directly from the air. Removing water from the air reduces the air vapor pressure, which
improves evaporation. This makes the DRY-700 the logical choice for structural drying, support drying for mold remediation, and new construction building envelope drying. Since the silica gel desiccant does not rely on condensation, the DRY-700 provides drying well below 32°F dewpoint. Humidity can be controlled below levels at which moisture condenses on surfaces, thereby preventing corrosion, mold and mildew formation. The DRY-700 boasts a 9KW, proportionally controlled, electric resistance heater to provide the reactivation energy required to handle a variety of drying situations year round. Getting 700 cfm of dehumidified process air where it is needed is no problem with 2.5” external static pressure.
Features:
Portability / Manueverability
• 12’ self-storing power cord
• Heavy duty wheels on solid steel axle
• Narrow width to fit through doorways
High capacity
• Delivers 700 scfm with 2.5” ESP
• 9 KW reactivation heater to remove 16.6 lbs. of
H2O/hr. at 75°F/50% RH inlet conditions
• Independent process and reactivation inlet and
outlet connections
Solid construction
• Rugged all aluminum cabinet construction
• Differential pressure gauges for balancing airflow across rotor
• 30% pleated inlet air filters
• Proportionally controlled electric reactivation
• Built in air proving and temperature over heat protection
• Beaded air connections to accommodate 8” round flex-duct
Control Panel
• D-STAT Control simple On-Off-Auto-selector switch
• LED indicator lights
• Rotary non-fused disconnect switch
Specifications
Process Volume: 700 SCFM
Moisture Removal: 16.6 lbs/hr*
Heater Watts: 9.0 kW
ESP Process: 2.5” wc
ESP Reactivation: 1” wc
Weight: 330 lbs
Dimensions (LxWxH): ”70.2 x 28.0” x 36.8”
Full load amps: 50.8 A @ 230/1/60
*@75°F / 50%RH inlet conditions
DRY-700 Maintenance | DRY-700 Operation Outline | DRY-700 Troubleshooting
