Dehumidifiers

Medium-sized rotomolded LR dehumidifier with full-sized performance of 92 pints/day at AHAM (max of 21 gallons/day. Stackable. 12″ inboard wheels. Telescoping handle. Ductable inlet. 230 CFM outlet with snap-on duct ring. Reservoir pump with 20′ lift. 33′ drain hose. 20′ power cord. 6.1 Amps. 115 Volt/60Hz. 105 Lbs

4026300

The Phoenix R200 is a compact, energy efficient LGR dehumidifier that removes 125 pints per day (AHAM) while drawing only 8.3 amps of electricity. The R200 outperforms the larger competitive dehumidifiers by removing more water, providing larger grain depression and consuming less power. The proven LGR design is surrounded by a durable roto-molded high impact plastic to create a dehumidifier that is smaller and lighter than competitive units.

4027000

Superior high temperature performance up to 120 degrees F. Stainless steel cabinet with inboard wheels, 335 CFM high static pressure, Snap-on duct ring, reservoir pump with 20 Ft lift, 20 Ft drain hose, 20 Ft power cord, 7.5 Amps, 115 Volt/60 Hz, 138 Lbs.

4025900

A proven product in the restoration industry, the Phoenix 200 Max removes up to 30 gallons per day, Stainless steel cabinet, snap-on duct ring, reservoir pump with 20 Ft lift, 20 Ft drain hose, 20 Ft power cord. Optional filtration up to MERV-14.7.4 Amps, 115 Volt/60 Hz, 131 Lbs

4024920

Up to 38 gallons/day. 176 pints/day at AHAM. Most water removal available on 15 amp circuit. Stainless steel cabinet. 540 CFM. Twist-on duct collar. Reservoir pump with 20′ lift. 20′ power cord. 12 Amps. 115 Volt/60Hz. 175 Lbs

4022599

LGR Performance Amplifier increases output of Phoenix 200 MAX or HT series dehumidifiers up to 100% by using ducted unaffected air to pre-cool affected air with no cross-contamination of air streams. Reduces dehumidifier grain output, heat output, and amp draw. 20′ power cord. Stackable. Stainless cabinet. 240 CFM. 2.0 amps. 115 Volt/60Hz. 39 Lbs

4026600

Portable Desiccant Dehumidifier. Ultra low grains. Wide operating range. Similar dimensions as a 200MAX. 385 CFM process airflow. 75 CFM reactivation airflow. 116 pints/day at AHAM. High static pressure allows superior ducting possibilities. Two 20′ power cords, each 115 volt/60Hz. 11 amps per cord. 22 amps total. 105 Lbs.

4026700

The 1200 Portable Desiccant Dehumidifier offers both a constant-run mode for maximum drying and a humidistat controlled mode for sensitive jobs. Using 230 volt power for dehumidification the 1200 leaves all the standard 120 volt outlets available for your Phoenix air movers. Its dual 8” process outlets allow you to run dry air to the interior as well as an attic or crawl space. The 900CFM process airflow (300CFM react airflow), and 25/40 amps make the energy efficient 1200 a perfect fit for the restoration industry. 230V, Single Phase. One 19ft. un-terminated cord included. 265 lbs.

4028000

The Artic Max is the first Portable Air Conditioner designed specifically for the Restoration Industry. One Ton (12,000 BTU’s) of cooling capacity with an evaporator (cooling) airstream of 430 CFM and water removal of 100 pints per day operating in 95 F / 60% conditions, Filter efficiency options up to MERV-11 11.7 Amps 11560Hz. 142 Lbs.

4026850

Electric Heat Drying System. Powerful, portable and safe. BTU’s where ever you need them – providing up to 31.00 BTU’s of instant heat to speed up your drying – that’s 360 CFM with a 80F temperature rise. The FireBird offers multiple heating, ducting and electrical options for on-demand heating from inside or outside the drying space. 30 Amp or 50 Amp / 220 V operation. Two 8 ft. cords w/4 pronged outlet included. 90 Lbs.

4027300

Totally portable, self contained and designed for maneuverability in small spaces like building elevator and tight corridors. Removes 13.3 lbs/hr. Dimensions 70.2″ x 24.8″ x 36.6″

Full load amps: 52.4@230/1/60
Weight: 320 lbs
External Static Pressure: 2.5 Inches

Buying STULZ means buying unparalleled performance!
Light weight for reduced mobility costs.
Cabinet, skid base with 4-way slots, All framing manufactured in heavy duty welded aluminum, panned roof over unit.
High external static pressure. 24 month parts warranty, 5 year rotor warranty.