Low amp draw (UNDER 3 AMPS!), balanced airflow characteristics and maximum velocities of 2700 FPM are the foundation on which the Phoenix Centrifugal Air Mover is built. We made sure the body was the most rugged and durable it could be, to stand up to the rigors of the restoration industry.

Getting more equipment into the drying chamber is always a challenge. The typical household electrical system cannot support the amount of equipment needed to dry the structure quickly and efficiently ensuring a nonstop search for equipment that provides both performance and low amp draw.

The unique 1/3 horsepower design of the Phoenix Centrifugal Air Mover coupled with a two-speed switch allows the restoration technician to deliver the most airflow using the fewest amps. Maximum amp draw on high speed is 2.8 amps. Minimum amp draw on low speed is a mere 2.4 amps. This means that it is now possible to fit as many as four centrifugal air movers onto a typical 15 amp household circuit. If you attempt four centrifugals from our competition, we recommend you locate the breaker box first.

The CAM housing is stackable, washable, durable, and chemical resistant and multi-positionable. In addition, molded-in runners allow for the air mover to be positioned horizontally, 45° and 90° angles.

Features

• 2-Speed, 1/3 Horsepower Motor with automatic-reset thermal protection. 2.8 Amps on High Speed 2.4 Amps on Low Speed
• Maximum Velocity – 2700 FPM
• Balanced Exhaust Airflow
• Directional Airflow Horizontal, 45° Angle, 90° Angle
• Durable, rugged, chemical resistant housing, fan wheel, and control design.
• Operator interface conveniently located for easy access, featuring: power indicator lamp and large three-position switch.
• Phoenix exclusive Pilot Light and Sealed Switch are recessed to prevent damage.
• Ergonomic carry handle and power cord storage.
• Non-marking, anti-skid, rubber feet.
• On-board duplex GFCI outlet and circuit breaker (Phoenix CAM Pro only)

• Spec Sheet
• Manual
• Pro Manual

The Phoenix Axial Air Mover is the industry’s only air mover specifically engineered with patent pending FOCUS™ Technology. FOCUS Technology revolutionizes evaporative drying by producing air velocities greater than competitive products and focusing those velocities on hard-to-dry areas such as carpet and pad, sub-floor and walls.

The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, FCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box.

Performance

• Greater air velocities than competitive products
• Focused velocities 0 to over 23.5 feet
• Directs air flow towards problematic corners, where the wall meets the floor
• Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage
• 3000 cfm
• Long-life 2-speed motor
• Low noise, quiet operation

• Lightweight and compact linear low density polyethylene (LLDP) housing is washable, chemical resistant and stacks for storage
• Colored Restoration Red for high visibility
• Ergonomic handle

• Power-on indicator light
• Automatic hour meter displays site run time
• On-board power management:
• Circuit breaker protects air mover and attached devices and prevents nuisance visits to the junction box
• GFCI protection promotes operator safety in wet applications
• Duplex AC outlet allows daisy chaining of up to four axial air movers
• 20 ft AC cord with cord management
• Units interlock for ease of stacking during storage and handling
• Weighs 2.5 lbs less than competitive units

• Spec Sheet
• Manual

OUR NEW CENTRIFUGAL AIRMOVER
Offers the restorer maximum airflow and optimum features while consuming the fewest amps.

It’s three position airflow. Stacking Capacity. Rugged roto molded housing. Famous 2 year warranty and 3 Speed, 4 position switch Low Amp Draw, 2.7 High Speed, 2.4 Low Speed allowing uo to 4 on a single circuit, Directional Airflow, Stackable, 25 Ft Power Cord, Built in Cord Wrap.

PERFORMANCE
3-SPEED 1/3 HORSEPOWER MOTOR

POWER: 115 VAC 60 HZ

DIRECTIONAL AIRFLOW
HORIZONTAL
45° ANGLE
90° ANGLE

BALANCED AIRFLOW FOR QUIETER OPERATION

CONSTRUCTION
LIGHTWEIGHT AND COMPACT LINEAR LOW DENSITY POLYETHYLENE (LLDP) HOUSING IS WASHABLE AND CHEMICAL RESISTANT.

UNITS INTERLOCK FOR EASE OF STACKINH DURING STROAGE AND HANDLING.

ERGONOMIC HANDLE

INTERGRALLY MOLDED CORD WRAP. ]]> http://www.firstchoicedryingequipment.com/viking-2200-ex/feed/ 0 http://www.firstchoicedryingequipment.com/viking-windstorm-2200/ http://www.firstchoicedryingequipment.com/viking-windstorm-2200/#comments Sat, 23 Jan 2010 04:48:12 +0000 admin http://www.vreports.net/?p=535 The viking Windstorm 2200 is Viking Equipment’s flagship carpet dryer for the restoration market. The 3-speed windstorm delivers up to 22– CFM at approximately 3.9 AMPS, is stackable, comes with a 25′ power cord, and a built in cord rap. The windstorm 2200 is Viking’s most popular model for the restoration industry.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...]]> Get the lowest AMPS with the highest airflow.
The viking Windstorm 2200 is Viking Equipment’s flagship carpet dryer for the restoration market. The 3-speed windstorm delivers up to 22– CFM at approximately 3.9 AMPS, is stackable, comes with a 25′ power cord, and a built in cord rap. The windstorm 2200 is Viking’s most popular model for the restoration industry.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DIRECTIONAL AIRFLOW
HORIZONTAL
45° ANGLE
90° ANGLE

BALANCED AIRFLOW FOR QUIETER OPERATION

CONSTRUCTION
LIGHTWEIGHT AND COMPACT LINEAR LOW DENSITY POLYETHYLENE (LLDP) HOUSING IS WASHABLE AND CHEMICAL RESISTANT.

UNITS INTERLOCK FOR EASE OF STACKING DURING STORAGE AND HANDLING.

ERGONOMIC HANDLE

INTERGRALLY MOLDED CORD WRAP.